Features of air volume control valve:
1. Pressure independent control: the valve body in the valve body to install mechanical pressure compensation components, according to the air inlet and outlet pressure pressure for automatic pressure compensation to ensure that the wind valve in the static pressure changes to maintain a constant set of air flow; Pressure drop 150Pa ~ 750Pa within the scope of pressure to achieve independent control;
2. Accurate air flow control: through the air flow speed controller component positioning, air volume can be quickly adjusted, air volume control accuracy of ± 5%;
3. Air volume adjustment control range: air volume 50m3 / h ~ 1100m3 / h;
4. Fast response: response time to control signal and duct static pressure change: <1 second;
5. Anti-dust, maintenance-free: Compared with the conventional butterfly valve similar products, because this series of products without air flow (or pressure) sensor, so the sensor caused by dirty plug system failure caused by security incidents, improve product stability And durability.
6. highly anti-corrosion treatment: the use of PP plastic body material, is the product can be high-intensity corrosion conditions in the long-term safe operation;
7. Control mode switching and remote communication function: This product selection PLC programmable controller, with control mode switching function (software with a variety of operating modes, just set to change the valve running control state) and remote communication function.
8. High reliability, high quality price, courteous service: domestic quality products, reliable operation, quality and cheap,  provide 24-hour service.

(1) Electric air volume control valve

(2) Manual air volume control valve

(3) Venturi air volume valve

(4) Variable air volume butterfly valve

(10) Check valve

(1) The takeover standard of the split multi-leaf air volume dispatching valve is the same as the rectangular air duct standard of the national ventilation duct standardization.

(2) The blades of the air volume dispatching valve are side-opening and forward-opening, which are used as dispatching valves in ventilation, air dispatching and air purification systems.

(3) According to the test, the air-tightness of the air volume dispatching valve is good, and its relative air leakage is about 9%, and the dispatching performance is good.

It is difficult to distinguish PP plastic air valve from ordinary valves only from the working principle and appearance structure of PP plastic air valve, but the plastic air valve can be distinguished well according to the different materials of manufacture. If the outer surface of the air valve is damaged or worn, it may affect its excellent use effect. Therefore, when using the plastic air valve, the outer surface of the air valve must be protected in place to avoid damage to the outer surface. To the normal production of the enterprise.

The so-called PP pipe actually refers to the material made of polypropylene, which is mainly used in the indoor cold and hot water supply system of buildings. Compared with other materials of pipes, it has good advantages:

1. No corrosion: PP duct valve can withstand the PH value in a wide temperature range, ranging from 1 to 14 high acid and alkali corrosion concentrations.

2. Wear-resistant and non-scaling: PP pipe valves and pipe fittings have a uniform and smooth inner walls, with low flow resistance and no scaling.

3. Reduce vibration and noise: PP pipe valve has excellent sound insulation performance, which can significantly reduce vibration and noise caused by liquid flow.

4. Anti-freeze cracking: PP material has excellent elasticity so that the pipes and pipe sections can expand with the frost heaving liquid without cracking. 5. Anti-condensation, low heat loss: PP material is a poor thermal conductor, reducing condensation and reducing heat loss.

7. Simple installation: PP pipe valve is light in weight, easy to install and operate, and has weldability.

It is mostly used in cold air or hot air gas pipelines in ventilation and environmental protection projects. The specific industries are chemicals, building materials, power stations, glass products, etc. The sealing ring of the electric air valve is tightly processed with the same high-strength material as the valve body, which has good stability. It also has the advantages of simple structure, small operating torque and light weight, and the characteristics of rapid opening and closing, flexible actions, small operating torque, and large flow capacity are also one of the reasons for the good response of users. It can be applied to the control and adjustment of dust, flue gas, air, and fluids containing suspended particles and thick and turbid and slurry fluids, so it can be regarded as a powerful and practical component in industrial control components.