It is difficult to distinguish PP plastic air valve from ordinary valves only from the working principle and appearance structure of PP plastic air valve, but the plastic air valve can be distinguished well according to the different materials of manufacture. If the outer surface of the air valve is damaged or worn, it may affect its excellent use effect. Therefore, when using the plastic air valve, the outer surface of the air valve must be protected in place to avoid damage to the outer surface. To the normal production of the enterprise.

The current manual air valve mold a molding, high strength, good sealing, smooth appearance, low resistance. Its specifications are diameter 63 mm, 75 mm, 90 mm, 110 mm, 160 mm, 200 mm, 250 mm, 315 mm. The diameter of this pneumatic equipment is more than 359 mm which can be customized.

Adopt the new series of GT electric actuators, with double-acting and single-acting (spring reset), gear transmission, safe and reliable; large-diameter valves adopt series AW-type pneumatic actuators with fork drive, reasonable structure, and ample output torque. There are double-acting and single-acting.

1. Geared double pistons, ample output torque, and small volume.

2. The cylinder is made of aluminum gold material, which is light in weight and beautiful in appearance.

3. Manual operating mechanism can be installed on the top and bottom.

4. The rack-and-pinion connection can adjust the opening angle and rated flow.

5. The actuator can be equipped with electrical signal feedback instructions and various accessories to realize automatic operation.

6. IS05211 standard connection provides convenience for product installation and replacement.

7. The joint screws adjusted at both ends can make the standard product have an adjustable range of ??4?? between 0?? and 93??. Ensure the synchronization accuracy with the valve.

The so-called PP pipe actually refers to the material made of polypropylene, which is mainly used in the indoor cold and hot water supply system of buildings. Compared with other materials of pipes, it has good advantages:

1. No corrosion: PP duct valve can withstand the PH value in a wide temperature range, ranging from 1 to 14 high acid and alkali corrosion concentrations.

2. Wear-resistant and non-scaling: PP pipe valves and pipe fittings have a uniform and smooth inner walls, with low flow resistance and no scaling.

3. Reduce vibration and noise: PP pipe valve has excellent sound insulation performance, which can significantly reduce vibration and noise caused by liquid flow.

4. Anti-freeze cracking: PP material has excellent elasticity so that the pipes and pipe sections can expand with the frost heaving liquid without cracking. 5. Anti-condensation, low heat loss: PP material is a poor thermal conductor, reducing condensation and reducing heat loss.

9. Simple installation: PP pipe valve is light in weight, easy to install and operate, and has weldability.

(1) Electric air volume control valve

(2) Manual air volume control valve

(3) Venturi air volume valve

(4) Variable air volume butterfly valve

(7) Check valve

It is mostly used in cold air or hot air gas pipelines in ventilation and environmental protection projects. The specific industries are chemicals, building materials, power stations, glass products, etc. The sealing ring of the electric air valve is tightly processed with the same high-strength material as the valve body, which has good stability. It also has the advantages of simple structure, small operating torque and light weight, and the characteristics of rapid opening and closing, flexible actions, small operating torque, and large flow capacity are also one of the reasons for the good response of users. It can be applied to the control and adjustment of dust, flue gas, air, and fluids containing suspended particles and thick and turbid and slurry fluids, so it can be regarded as a powerful and practical component in industrial control components.

This valve is made of the same material as the valve body and processed into a sealing ring, which adopts electric or pneumatic transmission. The applicable temperature depends on the material selection of the valve body, and the nominal pressure is ??0.6MPa. Generally, it is suitable for industrial, metallurgical, environmental protection, and other pipelines for ventilation and media flow adjustment. Its main features are:

1. Novel and sound design, unique structure, lightweight, and rapid opening and closing.

2. Small operating torque, convenient operation, labor-saving and dexterous.

4. Use suitable materials to meet the requirements of low, medium and high medium temperatures and corrosive mediums.

(1) The takeover standard of the split multi-leaf air volume dispatching valve is the same as the rectangular air duct standard of the national ventilation duct standardization.

(2) The blades of the air volume dispatching valve are side-opening and forward-opening, which are used as dispatching valves in ventilation, air dispatching and air purification systems.

(3) According to the test, the air-tightness of the air volume dispatching valve is good, and its relative air leakage is about 6%, and the dispatching performance is good.

Air volume control valves are widely used in industrial, mining, and civil building HVAC systems, industrial waste gas purification systems, and are one of the key equipment to control ventilation modes in various environments.

Material and category

The common materials of the air volume control valve are PP material, stainless steel material, PP material, and galvanized steel plate. The most used in the industrial waste gas purification industry is the PP damper.

Common types of damper:

1. Split multi-leaf control valve

2.Butterfly valve (single leaf regulating valve)

3. Manual air valve

4. Electric air volume control valve

5. Airtight damper