Description
Introduction of Analog Electric Damper
The Analog Electric Damper produced by Xicheng EP Ltd. is mainly used in PP material ventilation duct system, connected with PP air duct, used for corrosive gas extraction and exhaust control, anti-corrosion acid and alkali resistance, PP electric air valve specifications Complete, supporting PP air ducts, elbows, tees, and variable diameters are used to form a complete PP ventilation duct system. The damper body below ø315 is injection-molded, and the body above ø315 is custom-made by coil.
Analog Electric Damper is a kind of non-sealed butterfly valve, which is widely used in colleges, chemical, biological, electric power, energy, environmental engineering, etc. in the production process, the medium temperature is less than or equal to 90 ℃, and the nominal pressure is less than 0.1Mpa. , Open and close or adjust the medium, usually installed on the top of the fume hood, the PP suction hood and the inlet of the pipeline of the one-use-one-standby spray tower, as a switch to the exhaust gas flow direction of the PP spray tower.
Analog Electric Damper
The Analog Electric Damper is installed in the PP pipeline system. Through manual operation or PLC automatic control technology, the PP electric air valve can be opened and closed according to the needs. Drive the rotation of the butterfly valve blade to achieve a 90-degree angle, achieve the purpose of opening and closing, and have a feedback indication function. Through the differential pressure detection device, after closing the air valve, the signal is transmitted to the PLC system, so as to control the PP fan inverter to reduce the speed and save energy.
Analog Electric Damper parameters
Voltage: AC220V
Current: <0.1A
Torque: 8N/m
Switch stroke: 6 seconds
Analog Electric Damper performance characteristics
PP material processing, acid and alkali corrosion resistance, strong anti-corrosion performance;
Both ends of the Analog Electric Damper are designed with sockets and flanges, and flanges can also be welded;
High-strength actuator, all-copper design, switch life more than 20,000 times;
The inner and outer walls are smooth and the wind resistance is small.
Analog Electric Damper specifications and models
| model | Inner diameter-mm | Overall width with actuator -mm | Outer diameter-mm | height-mm |
| ø160 | 160 | 230 | 170 | 185 |
| ø250 | 250 | 330 | 260 | 185 |
| ø315 | 315 | 390 | 325 | 185 |
| custom made | custom made | custom made | custom made | custom made |
Analog Electric Damper industry application
Workshop ventilation system
Chemical fresh air system
Laboratory ventilation system
HVAC system
- Warrantry time: 1 year
- Product spec: Custom
- Material: 100% polypropylene
- Shape: round or square
- Contact information
- Email: Leyte@chian-xicheng.com
- Whatsapp: +86 19925135783
